Fry's Electronics FR-54RTR User Manual Download Page 99

Page: 99 / 104

FR-54RTR User Manual

Appendx D - Contactng Techncal Support

Contacting Technical Support

Fry’s provdes free techncal support for customers wthn the Unted States for the duraton of the warranty perod on

ths product. Customers can contact Fry’s techncal support through our web ste or by phone.

Before you contact techncal support, please have the followng ready:

• Model number of the product (e.g. FR-54RTR)

• Hardware Revson (located on the label on the bottom of the router (e.g. rev A1)

• Seral Number (s/n number located on the label on the bottom of the router).

You can find software updates and user documentation on the Fry’s website as well as frequently asked questions and

answers to techncal ssues.

For customers within the United States:

Phone Support:

(888) 755-7070

Mon- Fr 9am - 6pm PST

Internet Support:

http://www.frysnetworksupport.com

Summary of Contents for FR-54RTR









































































































Search results

Summary of Contents for FR-54RTR

Reviews:

Related manuals for FR-54RTR

Brands by name

Popular brands

Fry's Electronics FR-54RTR, User Manual

Search results

Summary of Contents for FR-54RTR

Reviews:

Related manuals for FR-54RTR

Brands by name

Popular brands