Fronius TransSteel 2700c, Operating Instructions Manual

Page: 85 / 120

Factory setting: 150
Hti Hot-current time
Unit: s
Setting range: 0 - 2.0
Factory setting: 0.5
Ast Anti-Stick
Unit: -
Setting range: On, OFF
Factory setting: OFF
FAC Factory - Reset power source to factory setting
Press and hold down one of the "Parameter selection" buttons for 2 s to restore
the factory settings
- when "PrG" appears on the digital display, the power source has been reset.
IMPORTANT! When the power source is reset, all personal settings are lost.
When the power source is reset, operating points that were saved using the
"Save" buttons are not deleted, but are retained in the memory. The functions in
the second level of the Setup menu (2nd) are also not deleted. Exception: Igni-
tion time-out function parameter (ito).
2nd Second level of the Setup menu (see "Setup menu - level 2")
85
EN