Fronius TRANS STEEL 3500 C0MPACT, Operating Instructions And Spare Parts List

Page: 79 / 112

77
g
Setup menu
General remarks The Setup menu provides simple access to expert knowledge in the power source and to
additional functions. The Setup menu can be used to make simple adjustments of the pa-
rameters to suit the various job settings.
Setting the set-up
parameters Setting the set-up parameters is described here with reference to the "MIG/MAG standard
synergic welding" process. The procedure for changing other set-up parameters is identi-
cal.
Opening the set-up menu
The control panel is now in the set-up menu for the "MIG/MAG standard synergic welding"
process - the last set-up parameter that was selected is displayed.
Changing welding parameters
Exiting the set-up menu
use the "Process" button to select the "MIG/MAG standard syn-
ergic welding" process
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
select the required set-up parameter using the "Mode" and "Proc-
ess" buttons or the left-hand adjusting dial
1
2
3
4
5
change the value of the set-up parameter using the "Parameter
selection" button or the right-hand adjusting dial
6
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
7
8
9