Fronius TRANS STEEL 3500 C0MPACT, Operating Instructions And Spare Parts List

Page: 25 / 112

23
g
General
Device concept
The TransSteel (TSt) 3500c power sources
are completely digitised, microprocessor-
controlled inverter power sources.
The modular design and potential for sys-
tem add-ons ensure a high degree of flexi-
bility. The devices are designed for the
welding of steel.
All devices are suitable for:
-
MIG/MAG welding
- Manual metal arc welding
Functional princi-
ple The central control and regulation unit of the power sources is coupled with a digital signal
processor. The central control and regulation unit and signal processor control the entire
welding process.
During the welding process, the actual data is measured continuously and the device re-
sponds immediately to any changes. Control algorithms ensure that the desired target
state is maintained.
The device has a "Power limitation" safety feature. This means that the power source can
be operated at the power limit without compromising process safety. For more information,
see the "Welding mode" section.
This results in:
-
A precise welding process
- A high degree of reproducibility of all results
- Excellent weld properties.
Application areas The devices are used in workshops and industry for manual applications with classical
steel and galvanised sheets.
The TSt 3500c power sources are designed for:
-
Machine and equipment construction
- Steelwork
- Plant and container construction
- Metal and gantry construction
- Rail vehicle construction
Warning notices
on the device Warning notices and safety symbols are affixed to the power sources. These warning no-
tices and safety symbols must not be removed or painted over. They warn against operat-
ing the equipment incorrectly, as this may result in serious injury and damage.