Fronius TRANS STEEL 3500 C0MPACT, Operating Instructions And Spare Parts List

Page: 32 / 112

30
Synergic control panel
General The power source uses the Synergic control panel and certain general items of data, such
as sheet thickness, filler metal, wire diameter and shielding gas, to calculate the best weld-
ing parameters. As a result, stored knowledge is available at all times. All the parameters
can be adjusted manually. The Synergic control panel also allows parameters to be set
manually.
Synergic control
panel
No. Function
(1) "Parameter selection" button (right)
a) for selecting the following welding parameters
Arc length correction
for correcting the arc length
Welding voltage *)
Welding voltage in V.
Before the start of welding, the system automatically displays a standard val-
ue based on the programmed parameters. During welding, the actual value is
(11)
(12)
(4)
(7) (10) (9) (8) (6)
(3)
(2)
(1)
(5)