![Fronius Acerios Operating Instructions Manual Download Page 7](http://html1.mh-extra.com/html/fronius/acerios/acerios_operating-instructions-manual_2339066007.webp)
Intended Use
The device is to be used exclusively for its intended purpose.
The device is intended exclusively for the process specified on the rating plate.
Utilization for any other purpose, or in any other manner, shall be deemed to be
"not in accordance with the intended purpose". The manufacturer accepts no li-
ability for any damage resulting from improper use.
Intended use also means
-
reading and adhering to all instructions in the Operating Instructions
-
reading and adhering to all safety instructions and danger notices
-
carrying out all the specified inspection and servicing work.
Never use the device for the following applications:
-
Thawing pipes
-
Charging batteries
-
Starting motors
The device is designed for operation in industry and business. The manufacture
shall not be liable for any damage resulting from use in a living area.
The manufacturer shall also not be liable for faulty or incorrect work results.
Environmental
Conditions
Operation or storage of the device outside the stipulated area will be deemed as
not in accordance with the intended purpose. The manufacturer accepts no liab-
ility for any damage resulting from improper use.
Temperature range of the ambient air:
-
During operation: -10°C to +40°C (14°F to 104°F)
-
During transport and storage: -20°C to +55°C (-4°F to 131°F)
Relative humidity:
-
Up to 50% at 40°C (104°F)
-
Up to 90% at 20°C (68°F)
Ambient air: free of dust, acids, corrosive gases or substances, etc.
Altitude above sea level: up to 2000 m (6561 ft. 8.16 in.)
Obligations of
the Operating
Company
The operating company must only allow persons to work with the device if they
-
Are familiar with the basic occupational safety and accident prevention regu-
lations and are trained in handling the device
-
Have read and understood these Operating Instructions, especially the sec-
tion "Safety Rules," and have confirmed this with their signature
-
Are trained according to the requirements for the work results
The safety-conscious work of the personnel must be checked regularly.
Obligations of
Personnel
All persons who are assigned to work with the device must do the following be-
fore beginning the work:
-
Follow the basic regulations for occupational safety and accident prevention
-
Read these Operating Instructions, especially the section "Safety Rules," and
confirm that they have understood and will follow them by signing
Before leaving the workplace, ensure that no personal injury or property damage
can occur in one's absence.
7
EN-US
Summary of Contents for Acerios
