Fronius Acerios, Operating Instructions Manual

Page: 36 / 84

1
Anchor the upright console to the surface
2
Fit the cooling unit on the upright console
IMPORTANT! To mount the cooling unit, follow the "FK 9000 R in Conjunc-
tion with a Power Source" chapter in the Operating Instructions for the cool-
ing unit.
3
Connect and secure the plasma power source to the cooling unit
4
Set up the plasma torch (on the robot, for example)
5
Connect the plasma torch to the plasma power source and the cooling unit
6
Connect the plasma torch to the external gas regulator
7
Use a LocalNet cable to join the external gas regulator to the plasma power
source
8
Connect the process gas supply to the external gas regulator
IMPORTANT! A flow controller must not be fitted upstream of the external
gas regulator.
9
Connect the robot interface to the robot control system
10
Equip the plasma torch with the correct wearing parts
NOTE!
Do not use pure tungsten electrodes for the Acerios plasma power source (color
code: green).
36