Fronius Acerios, Operating Instructions Manual

Page: 48 / 84

Saving a Job
NOTE!
Jobs cannot be created in Job Mode.
Creating a new job:
1
Set the desired process parameters to be saved as a job
NOTE!
Apart from specific settings in the 2nd level Setup menu, all the currently
made settings are saved.
2
Briefly press the store button to switch to the Job menu.
The first free program location for the job is displayed.
3
Use the selection dial to select the desired program location, or leave the
suggested program location.
4
Press and hold the store button
NOTE!
If the selected program location already has a job assigned to it, the existing
job will be overwritten by the new job.
This action cannot be undone.
"Pro" shows on the left digital display - the job is saved to the preset program
location.
If "PrG" appears on the left digital display, saving has finished.
5
Release the store button
6
Briefly press the store button to exit the Job menu.
The power source switches to the setting requested before the job was saved.
48