Fronius Acerios, Operating Instructions Manual

Page: 26 / 84

mm indicator
Illuminates when the electrode diameter setup parameter has been selec-
ted
s indicator
Illuminates when parameters t
up
and t
down
have been selected, along with
the following setup parameters:
GPr / G-L / G-H / t-S / t-E / C-t / HFt / Ito / Arc
% indicator
Illuminates when parameters I
start
and I
end
have been selected, along with
setup parameters dcY and I-G
A indicator
(10) LocalNet connection
Standardized connection socket for system add-ons
(11) Torch control connection
Input for the collision protection signal if connecting a robot interface or
fieldbus coupler
(12) Operating mode button
For selecting the operating mode
2-step mode
4-step mode
Job Mode
When a mode is selected, the LED illuminates at the corresponding sym-
bol.
(13) Gas-test button
For setting the required gas volume on the pressure regulator
After pressing the gas-test button, process gas is released for 30 s.
Press the button again to stop the gas flow prematurely.
(14) Selection dial
for changing parameters. When the indicator on the selection dial illumin-
ates, the selected parameter can be changed.
(15) Store button
For saving jobs and accessing the Setup menu
26