Fronius Acerios, Operating Instructions Manual

Page: 37 / 84

Commissioning
Connecting the
Gas Cylinder
WARNING!
Danger of severe injury and damage to property if gas cylinders fall over.
▶
Place gas cylinders on a solid, level surface in such a way that they remain
stable.
▶
Secure the gas cylinders to prevent them from falling over: the retaining
strap must be attached at the height of the upper part of the gas cylinder.
▶
Never secure a retaining strap to the neck of the cylinder!
▶
Observe the safety rules of the gas cylinder manufacturer!
1
Secure the gas cylinder
2
Remove the safety cap from the gas cylinder
3
Briefly open the gas cylinder valve to remove surrounding dirt
4
Inspect the seal on the gas pressure regulator
5
Screw the gas pressure regulator to the gas cylinder and tighten the connec-
tion
6
Use a gas hose to join the gas pressure regulator and the GAS IN connection
at the external gas regulator
7
Tighten the gas hose union nut
Connecting the
Plasma Torch
1
Set the power switch to - O -
2
Insert the power cable from the plasma torch hose pack into the current
sockets of the plasma power source and twist clockwise to lock in place
IMPORTANT!
(-) = current socket / power cable with gas through-hole!
3
Connect the plasma torch gas hose to the GAS OUT connection on the ex-
ternal gas regulator
4
Fit parts to the plasma torch according to the plasma torch's Operating In-
structions
5
Connect the plasma torch coolant connections to the cooling unit according
to the color markings for coolant supply and coolant return (red)
37
EN-US