Installation | 4
M0741021_en | Installation and operating instructions Spring blade agitator FBR
21
4.3.2 Assembling the gears and feeder trough
r
Fit the open trough with ceramic fibre seal to the transfer channel
- 4x hexagonal screw M12 x 35
Ä
Check the alignment of the flange plates!
r
Fit the mitre gear to the flange of the open trough
- 4x hexagonal screw M16 x 35
r
Fit the gear supports to the mitre gear as shown
- 2x hexagonal screw M16 x 35
Ä
Observe the assembly height in the installation diagram!
Ä
Do not fully tighten the screws yet!
r
Place intermediate plate over bracket with mitre gear and secure it to the flange of the
open trough
- 4x hexagonal screw M16 x 35