4 | Installation
32
M0741021_en | Installation and operating instructions Spring blade agitator FBR
4.3.10 Temperature monitoring device in the fuel store (TMD):
Ø 6 mm
A
r
Position the sensor plate above the transfer channel from open to closed trough (A)
and transfer the holes to the wall
r
Drill the marked holes
- Drill diameter 6 mm
- Min. drill depth 50 mm
r
Hammer dowel Ø 6 x 30 into wall and mount sensor plate
- 4x screw Ø 4 x 40
r
Mount the housing outside the fuel store
r
Guide the sensor through the wall at a suitable point and push it into the sensor plate
Ä
CAUTION:
Do not kink the capillary tube!
r
Further cabling of the on-site warning device(s) according to the enclosed installation
instructions