Safety | 2
M0741021_en | Installation and operating instructions Spring blade agitator FBR
11
2.4.2 Requirements at the installation site
▪ Protect the store against all weather conditions.
▪ Protective structures must be designed in accordance with the applicable standards
and regulations
Information about the fuel store
NOTICE! The fuel store plate provided must be affixed in a conspicuous place in
the access area of the store
When FILLING the fuel store, observe the system DOCUMENTATION.
The filling procedures may vary depending on the discharge system, type of fuel and fill
level of the fuel store. Only use fuels permitted according to the boiler’s operating
instructions.
SWITCH OFF the HEATING AND FEED SYSTEM before ENTERING the fuel store.
Risk of injury due to moving parts and automatic startup. Shut off the feeder unit before
entering the fuel store and secure it so that it cannot be switched on again. There is a
further risk of injury from the uncontrolled rotation of spring-loaded components. These
must be secured during work.
There is a risk of carbon monoxide poisoning in the pellet stores. Adequately ventilate the
store before entering (at least 15 mins.). Only enter the store under the supervision of a
second person. While in the store, keep the door open and use a dust mask! There is a
risk of collapse and being buried alive as a result of cavity formation in the store.
Therefore, do not enter the fuel area!
Slick surfaces in the fuel store present a slipping hazard and fuel supply points present a
risk of falling.
As a rule, personal protective equipment (work clothing, protective gloves, sturdy shoes)
should be worn when working in the store and on the conveyor.
Unauthorized access prohibited! Keep children away! Design the fuel store in such a way
that it is safe to access and keep it locked. Keep the key in a safe place. No fire, open
flames or smoking! Protect the fuel from moisture.
Affix this notice in a conspicuous place in the access area of the fuel store.
