Frigomat AGG.2014 Series, Use And Maintenance Manual

Page: 46 / 96

45 - ENGLISH
- Never use any type of solvents and/or thinners to preserve the plastic parts and
gaskets during washing.
- Chemical sanitizing products must be used in compliance with standards in force and
with the utmost caution.
- During sanitizing operations, do not touch parts with tissues, sponges, rags or any
other non-sterile material.
RINSING AND DRYING
•
Wash your hands well and/or wear disposable latex
gloves.
•
Remove from the sanitising tank all the components
which were previously disassembled, brushed and
immersed.
•
Rinse them with plenty of cold drinking water, making
sure to remove all possible leftover sanitising solution.
•
Place the rinsed components on a clean table and let
them dry in the air.
DO NOT use rags, sponges or anything else to dry the
components. Make sure no dust or other impurities
come into contact with the sanitized surfaces while
they are drying.
•
Use the flexible shower head supplied with the
machine to rinse the fixed parts of the same, which
were previously treated with the sanitizer (tank, drain
duct, etc.).
•
When all the components are dry, put them back onto
the machine, making sure the gaskets are in good
conditions.