Frigomat AGG.2014 Series, Use And Maintenance Manual

Page: 32 / 96

31 - ENGLISH
6.5.2 TRANSFER INTO SEPARATE CONTAINER
If you wish to transfer the product from the heater
vessel to an external container, do as follows:
- Ensure the amount of product to be
transferred is compatible with the useful
capacity of the container of destination.
- Make sure the heater tap is in the diagonal
position to allow the product to flow directly
into the container you wish to use.
If not, extract the blocking pin from its seat,
turn the tap body to the diagonal position and
reposition the pin (Fig.1-2)
- Regardless of the function in progress, press
the STIRRING key on the control panel of the
heater (Fig.3).
To quickly and completely remove the
product from inside the vessel, it is always
necessary that the beater be functioning.
- To begin the transfer, turn the knob of the
piston to the released position and pull it
slowly towards you (Fig.4).
Pay the utmost attention during transfer of
boiling mixtures; handle the tap piston with
extreme care, use suitable containers and
take all possible precautions to reduce the
risk of injuries, even serious, due to contact
with boiling product.
- When all the product has been transferred in
the container and the heater vessel is empty,
push the piston to the closed position and
turn it to block it.
- Press “STOP” on the heater control panel
(Fig.5).
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5