Frigomat AGG.2014 Series, Use And Maintenance Manual

Page: 39 / 96

ENGLISH - 38
6.6.4 COFFEE SLUSH
- With the machine at STOP, press the STOP and
AUTOMATIC keys at the same time to access
the slush production program with time control
and cyclical mixing (Fig. 1).
- The SLUSH LED switches on to signal that one
has accessed the SLUSH mode.
- The LEDs of the UP (
▲
), Confirm (
◄►
) and
DOWN (
▼
) keys light up and the numbers
relative to the time setting to be configured,
expressed in minutes and between 1' and 10',
appear on the display. Press the UP (
▲
) and
DOWN ( ▼ ) keys to increase or decrease the
value (Fig. 2). High processing times correspond
to higher consistencies, low times correspond to
lower consistencies
The maximum programmable time value is equal
to 10 minutes but not all mixtures and not all
quantities can reach such a high consistency
value.
For low amounts of mixture do not select time in
excess of 3-5 minutes.
- Subsequently, press the Confirm (
◄►
) key to
start a new slush production cycle (Fig. 3).
- During the production cycle, the compressor
always keeps running, whilst the beater will
operate
in cyclic mode to reduce the
incorporation of air in the mixture.
- After the programmed time has elapsed, the
compressor stops and an intermittent acoustic
signal warns the operator that it is possible to
extract the product (Fig. 4).
The COFFEE SLUSH program does not
envisage the automatic preservation of the
product at the end of the production cycle.
Fig.1
Fig.2
Fig.3
Fig.4