Frigomat AGG.2014 Series, Use And Maintenance Manual

Page: 20 / 96

19 - ENGLISH
4. MIXING/UP (
▲
)
This button has 2 functions:
1. With the machine at STOP, pressing the MIXING key only starts
the beater motor at low speed. During any other operative phase,
pressing the MIXING key keeps the beater motor running at low
speed and stops the compressor. Press the STOP key to stop
mixing.
2. With the machine in the SEMI-AUTOMATIC program, by pressing
the UP key it is possible to increase the value of the selected
parameter.
5. EXTRACTION/CONFIRM (
◄► )
This button has 2 functions:
1. With the machine at STOP, pressing the EXTRACTION key starts
the beater motor at low speed. After a delay of a few seconds, it
automatically switches into high speed.
During any other operating phase of the machine, pressing the
EXTRACTION key switches the beater motor from low speed to
high speed after a delay of a few seconds and and disables the
compressor.
With the machine in extraction mode, by pressing and holding the
EXTRACTION key again for a few seconds, the compressor is
enabled for 15” and the display shows the message E-C (“cold
extraction” function).
2. With the machine in the SEMI-AUTOMATIC program, by pressing
the CONFIRM key it is possible to confirm the value of the selected
parameter.
6. AUTOMATIC CYCLE
In any operational phase of the machine, by pressing the AUTOMATIC
key the automatic production cycle starts that enables to reach the
best possible compromise between batch freezing time and ice cream
consistency, regardless of the type of mixture used, provided that they
are within the minimum and maximum capacity of the appliance.
7. SEMI-AUTOMATIC CYCLE
In any operational phase of the machine, by pressing the SEMI-
AUTOMATIC key
one accesses the semi-automatic production cycle
with consistency control, which enables the operator to manually
select the desired level of ice cream consistency, in relation to the type
of mixture used, , provided that it is within the minimum and maximum
capacity of the appliance.