Frigomat AGG.2014 Series, Use And Maintenance Manual

Page: 36 / 96

35 - ENGLISH
- During the maintenance phases of the
reached consistency setting, the indicator of
the SEMI-AUTOMATIC key flashes (Fig.7).
- It is possible to go to the product extraction
phase at any time.
In order to correct any initial programming
errors, during the execution of the semi-
automatic cycle it is always possible to vary
the consistency setting via the following
procedure:
- With the cycle in progress, press the SEMI-
AUTOMATIC (Fig. 8) key again.
- The LEDs of the UP ( ▲ ), CONFIRM ( ◄► )
and DOWN (
▼
) keys light up and the
numbers relative to the previously configured
consistency setting appear on the display.
Press the UP (
▲
) and DOWN (
▼
) keys to
correct the value (Fig.9).
- Press the CONFIRM key ( ◄► ) to validate
the new data and exit programming (Fig. 10).
The semi-automatic batch freezing cycle is
recommended for experts only because it
requires full awareness of machine operation
in relation to balancing the mixture one
intends to process.
Fig.7
Fig.8
Fig.10
Fig.9