3-2
If the inverter is found to normally function in the test run, start regular operation.
·
If any abnarmal condition is observed with the inverter or motor, immediately stop and locate the cause
(see 'Troubleshooting').
·
Even after the inverter stops outputting, touching any of the inverter output terminals, U, V, and W may
lead to electric shock if a voltage is continuously applied to the main circuit power terminals, L1/R, L2/S,
and L3/T, and auxiliary control power terminals, R0 and T0. The smoothing capacitor remains live after
the power switch is turned off and requires some time until completely discharged.
When touching an electric circuit after the shut-down, check that the charge lamp is off or check with a
multimeter that the voltage has been reduced to a safe level (24V or less).
·
Setting a function code in a wrong manner or without fully understanding this manual may cause the
motor to revolve at an unacceptable torque or speed, possibly resulting in accident or injury.
Accident on injury may result.
Summary of Contents for 5000VG7S Series
