Frenic 5000VG7S Series, Instruction Manual

Page: 43 / 97

4-5
Outline of Indications on Different Screens
No. Screen name Description
1 Operation mode You can change motor speed or switch LED monitor when this screen is shown on
KEYPAD during normal operation.
Function menu is shown on this screen for your selection. Select a desired
function from menu and press to call screen for selected function. Menu
contains the following options as KEYPAD functions.
No. Menu item Outline
1 Function menu If this is selected, a name list of function codes
appears. Select a desired code to call data setting
screen for that code where its setting can be checked
or changed.
2 CHECK DATA If this is selected, a data list of function codes
appears. Select a desired code to check its setting.
Similar to the SET DATA above, data setting screen
can be selected where its setting can be changed.
3 MONITOR This screen is used as operation status monitor to
check various data.
4 I/O CHECK This screen is used to check status of inverter and
optional analog input/output and digital input/output
signals.
5 MAINTENANCE
INFO This screen is used to check maintenance
information including inverter status, life expectancy,
communication errors, and ROM version.
6 MEASURE
LOAD FACTOR Maximum and average currents and average braking
power can be measured to determine load factor.
7 ALARM INFO This screen is used to check operation status and I/O
status at the time of the latest alarm.
8 ALARM
HISTORY This screen is used to check the latest alarm, multiple
alarms that occurred at the same time, and alarm
history. Select an alarm and press to check
cause of that alarm and troubleshooting information.
9 COPY DATA Function code settings for an inverter can be stored
and copied to another inverter.
2 Program menu
(Program mode)
3 Function
screens When a function is selected from program menu, the corresponding function
screen appears for execution of that function.
4 Detailed
information
screen Functions that cannot be executed by function screens (change of function code
settings and indication of causes of alarms) are displayed by detailed information
screen.
FUNC
DATA
FUNC
DATA