Frenic 5000VG7S Series, Instruction Manual

Page: 40 / 97

4-2
(A) LED monitor:
Four-digit 7-segment display
Used to display various items of monitored data such as setting frequency, output frequency and alarm
code.
(B) Auxiliary information indication for LED monitor:
Selected units or multiple of the monitored data (on the LED monitor) are displayed on the top line of the
LCD monitor. The
n
symbol indicates selected units or multiple number. The symbol indicates there
is an upper screen not currently displayed.
(C) LCD monitor:
Used to display such various items of information as operation status and function data. An operation
guide message, which can be scrolled, is displayed at the bottom of the LCD monitor.
(D) Indication on LCD monitor:
Displays one of the following operation status with n .
FWD: Forward operation REV: Reverse operation STOP: Stop
Displays the selected operation method:
REM: External signal LOC: KEYPAD panel COMM: Communication terminal JOG: Jogging mode
The symbol indicates there is a lower screen not currently displayed.
(E) RUN LED (valid during KEYPAD panel operation):
Indicates that an operation command is being input by pressing the or key.
(F) Control keys:
Used for inverter run and stop
: Forward operation command : Reverse operation command : Stop command
(G) Operation keys:
Used for screen switching, data change, frequency setting, etc.
The Table 4-1-1 shows the main function of the operation keys.
Table 4-1-1 Functions of Operation Keys
Operation key Main function
Used to switch the current screen to the menu screen or
switch to the initial screen in the operation/alarm mode.
Used to switch the LED monitor or to determine the entered
frequency, function code, or data.
,
Used to change data, move the cursor up or down, or scroll
the screen
Used to move the cursor horizontally at data change. When
this key is pressed with the up or down key, the cursor
moves to the next function block.
Used to cancel current input data and switch the displayed
screen. If an alarm occurs, this key is used to reset the trip
status (valid only when the alarm mode initial screen is
displayed).
+
Used to switch normal operation mode to jogging operation
mode or vice versa. The selected mode is displayed on the
LCD monitor.
+
Switches operation method (from KEYPAD panel operation
to external signal operation or vice versa). When these keys
are pressed, function F02 data is also switched from 0 to 1 or
from 1 to 0. The selected mode is displayed on the LCD
indicator. (REM, LOC)
PRG
RESET
STOP
STOP
ÙÙÙÙ
ÙÙÙÙ ÚÚÚÚ
FUNC
DATA
SHIFT
>>
RESET
FWD
REV STOP
FWD REV