0-2
·
Do not hold or carry this inverter by the surface cover. Inverter may be dropped
causing injury.
·
Ensure that the inverter and heat sink surfaces are kept free from foreign matter (lint, paper dust, small
chips of wood or metal chips),
as fire or accident may result.
·
Do not install or operate a damaged inverter or an inverter with missing parts,
as injury may result.
·
When changing installation bracket position, use the attached screws,
as injury may result.
Instructions on wiring
·
Confirm that the phases and rated voltage of this product match those of the AC power supply,
as injury
may result.
·
Do not connect the AC power supply to the output terminals (U, V, and W),
as injury may result.
·
Do not connect a braking resistor directly to the DC terminals (P(+) and N(
-
)),
as fire may result.
·
When using DC power input, ensure that the fan power switching connector (CN RXTX) is correctly
engaged in the inverter
as a trouble may occur.
·
When using DC power input of 18.5kW or larger inverter, be sure to connect AC power to terminals R0
and T0 for a power supply of fan
as a trouble may occur.
·
Ensure that the noise generated by the inverter, motor, or wiring does not adversely affect peripheral
sensors and equipment,
as accident may result.
Summary of Contents for 5000VG7S Series
