Freetech P6F212 User Manual Download Page 51

Page: 51 / 73

4.5.1.

VIA OnChip IDE Device

Scroll to this item and press <Enter> to view the following screen:

OnChip IDE Channel 10/11:

Use these items to enable or disable the PCI

IDE channels that are integrated on the mainboard. The default setting is

Enabled.

IDE Prefetch Mode :

The onboad IDE drive interface supports IDE

prefetching, for faster drive access. If you install a primary and secondary

add-on IDE interface, set this field to Disabled if the interface does not

support prefetching.

The default setting is Enabled.

Primary/Secondary Master/Slave PIO:

Each IDE channel supports a

master device and a salve device. These four items let you assign which

kind of PIO (Programmed Input/Output) is used by IDE devices. Choose

select a PIO mode from 0-4. The default setting is Auto.

Primary/Secondary Master/Slave UDMA:

Each IDE channel supports a

master device and a salve device. This mainboard supports Ultra DMA

technology, which provides faster access to IDE device. The default

setting is Auto.

Integrated Peripherals

BIOS Configuration

Summary of Contents for P6F212










































































Search results

Summary of Contents for P6F212

Reviews:

Related manuals for P6F212

Brands by name

Popular brands

Freetech P6F212, User Manual

Search results

Summary of Contents for P6F212

Reviews:

Related manuals for P6F212

Brands by name

Popular brands