Mainboard Users Manual
56
and time at which the RTC (real-time clock) alarm awakens the system
from Suspend mode. The default is Disabled.
Data (of Month):
This item selects the alarm date.
Key in a DEC number:Min=0, Max=31.
Resume Time (hh:mm:ss):
This item selects the alarm Time.
[hh] :
Key in a DEC number:Min=0, Max=23.
[mm/ss]:
Key in a DEC number:Min=0, Max=59.
Primary INTR:
Press Enter to on/off the wake up ability of a specified
IRQ. In the following is a list of IRQ's, Interrupt ReQuests, which can
be exempted much as the COM ports and LPT ports above can. When
an I/O device wants to gain the attention of the operating system, it
signals this by causing an IRQ to occur. When the operating system is
ready to respond to the request, it interrupts itself and performs the
service.
When On mode exist, activity will neither prevent the system
from going into a power management mode nor awaken it.
* IRQ3 (COM 2 )
* IRQ4 (COM 1)
* IRQ5 (LPT 2)
* IRQ6 (Floppy Disk)
* IRQ7 (LPT 1)
* IRQ8 (RTC Alarm)
* IRQ9 (IRQ2 Redir)
* IRQ10 (Reserved)
* IRQ11 (Reserved)
* IRQ12 ( PS / 2 Mouse )
* IRQ13 (Coprocessor)
* IRQ14 (Hard Disk)
* IRQ15 (Reserved).
Press
ESC
to return to the main menu.
Power Management