Freetech P6F212 User Manual Download Page 69

Page: 69 / 73

5. Driver and Utility

5.1. Flash Utility

The BIOS of the P6F212 mainboard can be upgraded by using a Flash

utility. A new version of the BIOS can be downloaded from the factorys

BBS and Web site. The system BIOS is stored in a 1 M-bit Flash EEPROM

that can be erased and reprogrammed by the Flash utility.

There are two files in the D:\DRIVER\FLASH directory:

FLASH.EXE

Flash utility for AWARD BIOS upgrade

README.TXT

Text file of instructions

The Flash utility will not work with any memory manager software

running in the system. In order to make sure no memory manager software

is running, boot your system from a bootable floppy diskette which does

not contain CONFIG.SYS and AUTOEXEC.BAT files. If you are using

MS-DOS 6.x, you can press the <F5> function key when the Starting

MS-DOS. message appears on the screen to by pass the CONFIG.SYS

and AUTOEXEC.BAT.

Driver and Utility

Summary of Contents for P6F212










































































Search results

Summary of Contents for P6F212

Reviews:

Related manuals for P6F212

Brands by name

Popular brands

Freetech P6F212, User Manual

Search results

Summary of Contents for P6F212

Reviews:

Related manuals for P6F212

Brands by name

Popular brands