53
ACPI Suspend Type:
Use this item to define how your system suspends.
If set to S1(POS) (default), the suspend mode is equivalent to a software
power down. If set to S3(STR), the suspend mode is a suspend to RAM
will be suspended if no Power Management events occur for a specified
length of time. Full power function will return when a Power Management
event is detected. Options are from Disabled, 1 Min, 2 Min, 4 Min, 6 Min,
8 Min, 10 Min, 20 Min, 30 Min, 40 Min, or 1 Hour. the system shuts down
with the exception of a refresh current to the system memory.
PM Control by APM:
When this item enabled, an Advanced Power
Management device will be activated to enhance the Max. Power Saving
mode and stop the CPU internal clock. If Advance Power Management
(APM) is installed on your system, selecting Yes gives better power
saving. If the Max. Power Saving is not enabled, this will be preset to No.
The default setting is Yes.
Video Off Option:
This option define if the video is powered down when
the system is put into suspend mode.
Video Off Method:
This setting controls the video off method in power
saving mode. The DPMS option allows the BIOS to control the video
card if it has the DPMS (Display Power Management System) feature.
Other options are V/H SYNC+Blank (default) and Blank Screen. The
V/H SYNC+Blank which disables V/H SYNC signals and blanks the
screen. The Blank Screen option is used when you do not have a
Green monitor.
MODEM Use IRQ:
If you want an incoming call on a modem to automati-
cally resume the system from a power-saving mode, use this item to
specify the interrupt request line (IRQ) that is used by the modem. You
might have to connect the fax/modem to a mainboard Wake On Modem
connector for this feature to work. Options are:
Suspend Mode:
The CPU clock will be stopped and the video signal will be
suspended if no Power Management events occur for a specified length of
time. Full power function will return when a Power Management event is
detected. Options are from 1 Min to 1 Hour and Didable.. The
default setting is Disabled.
Power Management Setup
BIOS Configuration
