Freetech P6F212 User Manual Download Page 41

Page: 41 / 73

Floppy Drive A and Floppy Drive B:

Options for these fields are:

360K, 5.25 in.

1.2M, 5.25in.

720K, 3.5in.

1.44M, 3.5in.

2.88M, 3.5in.

None (Not Installed) (Drive A/B default)

The Not Installed option could be used as an option for diskless

workstations.

Video:

Set this field to the type of graphics card installed in your system.

If you are using a VGA or higher resolution card, choose the EGA/VGA

option. The options are:

EGA/VGA (default)

MONO

CGA 40

CGA 80

Halt On:

This setting determines which type of errors will cause the

system to halt during bootup. The options are:

All Errors (default)

No Errors

All, But Keyboard

All, But Diskette

All, But Disk/Key

Base/Extended/Total Memory:

These items are automatically detected by

the system at start up time. These are display only fields. You cannot make

changes to these fields.

After you have made your selections in the Standard CMOS Setup screen,

press

<ESC>

to go back to the main screen.

Standard CMOS Setup

BIOS Configuration

Summary of Contents for P6F212










































































Search results

Summary of Contents for P6F212

Reviews:

Related manuals for P6F212

Brands by name

Popular brands

Freetech P6F212, User Manual

Search results

Summary of Contents for P6F212

Reviews:

Related manuals for P6F212

Brands by name

Popular brands