Freedom9 freeGuard Capture 1000, User Manual

Page: 21 / 107

freeGuard Capture Appliance User’s Manual
17
Name Binding:
- Binding to IP addresses: When the system captures the network traffic, all the network packets
from one IP address, will be treated as the one user. This method is usually used for the
corporation with the static IP addresses implemented in their network.
- Binding to MAC addresses: When the system captures the network traffic, all the packets from the
one MAC address, will be treated as one user. This method is generally used in the network
that clients PC does not have a unique IP address, such as a network with DHCP implemented.
Setup Interface IP Address
If different IP addresses range has been used other than the default IP address of ICR
appliance, you can also setup in this page.
–
Enter the valid IP for your internal network. A valid value for subnet mask,
default gateway and DNS server address are also required.
–
If VLAN has been implemented in your network, you may want to enable the
VLAN for WAN port (port 1) and LAN port (port 2).
–
Limitation to bandwidth of Downstream and Upstream can also be set.
Figure 10, Enter the settings in interface address