Freedom9 freeGuard Capture 1000, User Manual

Page: 22 / 107

18
The management interface address must correspond to the company’s environment.
Set the IP in same subnet as LAN. If the LAN is not the segment of 192.168.1.x, for example,
the LAN is the segment of 172.16.x.x, then the interface IP needs to be changed to 172.16.x.x.
For your reference, you may configure your management address based on the subnet ranges
below:
10.0.0.0 ~ 10.255.255.255
172.16.0.0 ~ 172.31.255.255
192.168.0.0 ~ 192.168.255.255
Enter all the subnet information to be captured, and click Finish
You can have the ICR appliance to capture different subnet from your network at the same time,
also you can assign the name to the subnet, which is treated as a department or user group in ICR
appliance.
Figure 11, Enter the subnet to capture