FP PostBase, Operator'S Manual

Page: 138 / 204

PostBase One Franking System 138
…
with automatic feeding
Feeding deforms or damages
letters. Reduce separation (see chapter 3.5.2.3, page 19) .
Notice the suggested settings for separation
(see table on page 17)
.
Jam. Check setting of letter path (slide control) and
adjust accordingly
(see chapter 3.5.1, page 16)
.
Check and adjust settings for separation (see
chapter 3.5.2, page 17) .
On how to clear a letter jam, please read
chapter 16.3, page 141 and chapter 16.4, page 142 .
Letters are not correctly
separated. Check setting of letter path (slide control) and
adjust accordingly
(see chapter 3.5.1, page 16) .
Letter transport
does not start. PostBase One does not display the Home screen /
the ‘Batch Processing’ pop-up.
Sensor does not recognise the letters.
To start letter transport: In the ‘Batch Processing’
pop-up, press the S
TART
button.
Feeder cover is open. Re-place cover correctly on
the feeder. The cover must latch audibly
(see page 19) .
Letter transport is stopped /
batch processing was inter-
rupted. Jam. Carefully read the displayed information.
On how to clear a letter jam, please read
chapter 16.3, page 141 and chapter 16.4, page 142 .
The batch counter is turned on. After the pre-set
number of mail pieces have been processed,
PostBase One will automatically stop.
Disable the batch counter or adjust the target count
(see chapter 5.3.2.3, page 54) .
Separation error, letter interval
too close. Reduce pressure
(see chapter 3.5.2.2, page 18)
.
Notice the suggested settings for separation
(see table on page 17) .
Issue Possible cause and remedy