FP PostBase Operator'S Manual Download Page 32

Page: 32 / 204

PostBase One Franking System

• In the Home screen, press the L

ABEL

EEDER

button.

PostBase One opens the pop-up “Batch
Processing”.

• Select L

ABEL

• Press the S

TART

button.

PostBase One prints a label.

Checking the print quality

Make sure the PostBase One always pro-
vides clean and legible franking imprints.

• Check the print quality. There must not be

any offsets, blurred or blank spots. Pay
special attention to the data matrix symbol.

This illustration shows a perfect imprint.

When there are offsets / shifts in the imprint:

• Align the ink cartridges. Read chapter 15.6

on page 116.

When there are blurred or blank spots in the
imprint:

• Clean print system. Read chapter 15.7 on

page 118.

Data matrix symbol

Offset

Blank spots

Summary of Contents for PostBase













































































































































































































Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands

FP PostBase, Operator'S Manual

Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands