FP PostBase Operator'S Manual Download Page 88

Page: 88 / 204

PostBase One Franking System

14.6

Product after Standby

This feature lets you define which product will be set for franking after reactivating
PostBase One from standby:

– the product stored as shortcut 1
– the product that was last used.

• Open the M

ENU

• Choose P

ROD

AFTER

TANDBY

PostBase One opens the adjustment menu
for this function. The current setting is shown
on a dark background.

• Select the desired setting.

• S

AVE

the setting shown.

14.7

Auto Off

PostBase One switches off automatically if it is not used for some time. The Auto Off
time is the time between your last operation and the time PostBase One automati-
cally switches off.

• Open the M

ENU

• Choose A

UTO

PostBase One opens the adjustment menu.

• Type the desired time.

• S

AVE

the specified Auto Off time.

The value “0” disables the Auto Off function.

ROUCT

AFTER

TANDBY

– possible settings and their meaning:

HORTCUT

After reactivating PostBase One from standby,
the product stored as shortcut 1 is set.

AST

RODUCT

PostBase One keeps the current (last) prod-
uct setting.

Summary of Contents for PostBase













































































































































































































Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands

FP PostBase, Operator'S Manual

Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands