FP PostBase, Operator'S Manual

Page: 53 / 204

Franking 53
5.3.2.2 Positioning letters in stack
If the desired product is set and the Home
screen shows the
Postage or Auto , you can
position mail pieces on the feeder to frank.
• Arrange the letter stack:
– the side to be printed faces the back
– envelope flaps face the bottom (enve-
lopes stand on their upper edges).
• Align upper edges flush:
Loosen letter stack with the upper edge on
a level base and shake smooth.
Do not place too many letters on the feeder.
The pressure bar should have about 5 mm
clearance.
• Grab the pressure bar in the grip recess
and pull it to the front.
• Place the letter stack on the letter guide
near the separation rollers. Make sure that
all letters stand on the letter guide on their
upper edges.
• Push the pressure bar against the letter
stack.
The batch procedure starts automatically.
The letters are separated from the stack,
moistened and sealed (if the moistening fea-
ture has been enabled), franked, and stacked
in the catch tray – ready for dispatch.
PostBase One is ready to frank
Letter upper edges