FP PostBase Operator'S Manual Download

Page: 107 / 204

Maintenance and care

107

Changing the print heads

PostBase One tells you when to change the
print heads.

• Confirm the message.

• Open the M

ENU

• Choose P

RINT

YSTEM

• Choose C

HANGE

ARTRIDGES

The exchange procedure starts.
PostBase One moves the print heads to the
exchange position and opens the flap.

Removing the print heads

Disconnect hose couplings:

• Hold an absorbent cloth ready.

• Press to release and remove the coupling

to the front.

• Wipe the hose coupling with an absorbent

cloth.

• Put hose coupling in according

stand-by position (

eft /

ight).

• Disconnect the coupling of the second

hose in the same way.

Use the stand-by position for the hose cou-
plings also when using cartridges instead of
print heads. The hoses will be fixed and not
lay loosely.

Stand-by position for
hose coupling (L / R)

Summary of Contents for PostBase













































































































































































































Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands

FP PostBase, Operator'S Manual

Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands