FP PostBase Operator'S Manual Download

Page: 30 / 204

PostBase One Franking System

• Choose Z

ERO

TEST

• Press OK to return to the Home screen.

When the Home screen shows the ‘Zero test’
settings, you can start printing. Proceed
exactly as when franking.

Printing the zero test print on an envelope

PostBase One with hand feed tray

• Place an empty envelope (or a post card)

on the hand feed tray:
– The side to be printed faces the back.
– Envelope flap to the bottom (envelope

stands on its upper edge).

• Push the envelope a few centimeters in the

direction of the arrow and let go of it.

Letter transport starts automatically as soon
as the sensor recognises the envelope.
PostBase One automatically feeds the enve-
lope, prints a zero test print, and exits the
envelope to the right side.

Summary of Contents for PostBase













































































































































































































Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands

FP PostBase, Operator'S Manual

Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands