12
4.
Locate the battery and carefully remove it from the board by sliding it out of the
holder. Note battery orientation as you remove it as the new battery must go back in
the same way (positive (+) side is up, negative (-) is down).
5.
Carefully slide the new battery into the holder.
6.
Place the circuit board back inside the appropriate case half.
7.
Line the two halves up together and snap them shut to form a single device once
again.
2.
Quick Start Guide
The following Quick Start Guide provides a very brief overview of basic operations such as
playing sounds, adjusting volume, and using presets. While this may be enough to get you
started, it is strongly recommended that you read the manual in its entirety to fully understand
all of the capabilities and get the most out of the product.
2-1 Connecting the Speakers
The Truck Pro comes standard with two external speakers. Prior to playing any sounds, you
must have at least one of the speakers connected. Each speaker has two colored ends: orange
and black. The back of the Truck Pro features 4 speaker jacks, each jack having an orange and
black plug. Be sure to keep the colors matched (orange to orange, black to black) when plugging
the speakers in.
The Truck Pro speakers feature a mounting bracket and 25’ of cable. This should provide you
with plenty of flexibility to mount the speakers just about anywhere on your truck. The speakers
also feature easy disconnect plugs that enable you to quickly disconnect the speakers from the
speaker wire and store inside. Each speaker has a protective neoprene cover that is provided to
help keep water from getting inside the speaker. Even with these covers in place, you should
