25
Barom. Units
Configure the barometer units of measurement
In, mm
Elevation
Set your elevation above sea level.
0 – 19,717 ft.
About Info
Displays system information
N/A
Restore
Defaults
Truck Pro remote factory reset
N/A
4-6 Playing Sounds with the Truck Pro Remote
The first operation that most users want to perform is playing sounds. There are multiple
methods in which you can initiate sound playback. Before attempting to play sounds, be sure
that the Truck Pro is connected to a power supply and Truck Pro remote has fresh batteries
installed and that both devices are powered-on.
There are two sound view mode options within the Truck Pro remote; Sound List and
Categories. This is configured through the TX1000 Settings item in the main menu. The method
of playing a sound is identical for both modes; the way the sounds are displayed on the screen
is the only difference. By default, the Truck Pro remote is setup to display the sounds by
categories.
To change how the sounds are displayed, access the TX1000 Settings menu and locate the menu
item titled “View”. Highlight “View” and the push the “Play/Select” button a single time. Use
the scroll buttons to cycle through either “Sound List” or “Categories”. When you decide which
option you would prefer to use, push the “Play/Select” button to lock it in.
Default: Categories View
When the Truck Pro remote is turned on, the main screen will be displayed. The first item is
“Favorites/Presets” followed by “FOXCAST”. The next menu item marks the beginning of the
category listings. In category list mode, your sounds will not be displayed as one long list, but
rather as elements of defined categories. You can have up to 50 unique categories. Use the
Scroll Buttons to browse through the available categories. Highlight the category you wish to
browse and push the “Play/Select” button to enter the category. All sounds associated with
that category will be displayed. Find the sound you wish to play, and then push the
“Play/Select” button to begin playback of the sound. Unless you changed the volume prior to
pushing “Play/Select”, the volume will start off at level 0, so you will need to increase the
volume using the volume up button in order to hear it play.
Optional: Sound List Mode
When selected, this option allows you to scroll through all available sounds in a single list. The
main screen will display “Favorites/Presets” and “FoxCast”, like normal, but a third option titled
“Sound List” will be present. To browse the sound list, select “Sound List” from the main screen.
You will then see a page that displays the first 9 sounds (000 – 008) loaded in the list. You can
use the Scroll Buttons to cycle through the sounds. Once you get to the end of the current
