17
remote does not need to be powered on for the FOXGRIP II to control preset 1 and
2.
3.
Truck Pro Detailed Overview
This chapter provides a more detailed oriented overview of the Truck Pro.
3-1 Power Information
The Truck Pro is designed to operate from a 12V power supply. The Truck Pro is shipped with a
power cable that enables you to connect to a cigarette lighter plug found in most vehicles. This
cable features a 5A slow-blow glass inline fuse. If you encounter a situation where the fuse must
be replaced, please use the image below for reference:
As you can see, there are 5 small pieces that must be accounted for during disassembly and
subsequent reassembly. The order they are shown in above is the order that you must use
when reassembling.
WARNING
If you are powering the Truck Pro from your vehicle battery, make sure that your
battery is healthy. If you frequently find that your vehicle will not start without a jump,
then we recommend that you do not use the Truck Pro until your vehicle has been
repaired by an automotive repair specialist.
3-2 Speaker and Speaker Jack Information
The Truck Pro ships with two 10W speakers. The Truck Pro has a total of four speaker jacks that
can accommodate up to 4 speakers. The speakers have two colored plugs: black and orange.
Always be sure to match colors when connecting the speakers. The Truck Pro can also work
with the FOXPRO SP-1130 30W speakers.
