14
2.
Access the Date/Time(r) menu and select “Date”
3.
By default, the first option is the month. Use the scroll buttons to select the current
month and then push the “Play/Select” button.
4.
Next you set the day using the same method described above, and then push
“Play/Select”.
5.
Finally, set the year and push “Play/Select” to lock it in.
There are three different date formats that you can choose from depending upon your personal
preference. They are month/day/year, year-month-day, and day.month.year.
Configuring Date Format:
1.
Access the Back Menu by pushing the Back/Menu button.
2.
Access the Date/Time(r) menu and select “Date Format”
3.
Use the scroll buttons to cycle through the options.
4.
When your desired date format is shown, push “Play/Select” to lock it in.
2-4 Playing Sounds
Before you can play sounds, make sure that the Truck Pro is connected to a 12V power source
and that power is applied to the connector the Truck Pro is plugged in to. Also check that you
have good batteries installed the remote control and that at least one speaker is connected to
the Truck Pro.
1.
Turn on the Truck Pro by placing the power switch in the “on” position.
2.
Turn on the Truck Pro Remote by pushing and holding down the power button for
approximately 1-2 seconds. The remote will default to Category View Mode, meaning
that the sounds are listed and grouped in categories.
3.
Use the scroll buttons on the remote to highlight the category you wish to pick a
sound from and then push the “Play/Select” button. The sounds assigned to that
category will be displayed.
4.
Use the scroll buttons on the remote to highlight the individual sound from that
category that you wish to play, and then push the “Play/Select” button to start
playback. Please note, the default play mode is set to single from the factory. This
means that the sound will play a single time and stop. This can be changed to repeat
mode and jukebox mode as well. See section 6.2.
5.
Use the volume up button to raise the volume level to a point where you can hear it.
6.
To mute (or pause) the sound, simply push the mute button. To resume playback,
push the mute button again.
7.
To switch sounds, simply go through the sound list or switch categories to find a
different sound and then just push the “Play/Select” button. To go back to the
previous sound, push the “Recall” button.
