Fostex VF-160, Operation Manual

Page: 20 / 154

20
AUTO
PLAY
AUTO
RETURN
AUTO
REPEAT
OFF
32. [AUTO RTN-START/MARK1] Key
* This key is used to CHECK/CHANGE the parameters
saved at the start point (AUTO RETURN START POINT)
when executing auto return or auto repeat.
* Press this key while the [SHIFT] key is depressed to
CHECK/CHANGE the parameters saved in [MARK1].
* This can be used as Locate Memory.
33. [AUTO PUNCH-IN/MARK2] Key
* This key is used to CHECK/CHANGE the parameters
saved at the recording start point (PUNCH IN POINT)
when executing auto punch in/out, paste or erase.
* Press this key while the [SHIFT] key is depressed to
CHECK/CHANGE the parameters saved in [MARK2].
* This can be used as Locate Memory.
34. [AUTO PUNCH-OUT/MARK3] Key
* This key is used to CHECK/CHANGE the parameters
saved at the recording end point (PUNCH OUT POINT)
when executing auto punch in/out or erase.
* Press this key while the [SHIFT] key is depressed to
CHECK/CHANGE the parameters saved in [MARK3].
* This can be used as Locate Memory.
35. [AUTO RTN-END/MARK4] Key
* This key is used to CHECK/CHANGE the parameters
saved at the end point (AUTO RETURN END POINT) when
executing auto return or auto repeat.
* Press this key while the [SHIFT] key is depressed to
CHECK/CHANGE the parameters saved in [MARK4].
* This can be used as Locate Memory.
36. [CLIPBOARD-IN/MARK5] Key
* This key is used to CHECK/CHANGE the parameter saved
at the start point (CLIPBOARD IN POINT) when copying
from or pasting to the clipboard.
* Press this key while the [SHIFT] key is depressed to
CHECK/CHANGE the parameters saved in [MARK5].
* This can be used as Locate Memory.
37. [CLIPBOARD-ALIGN SEL/MARK6] Key
* This key is used to CHECK/CHANGE the parameter saved
at the align point (ALIGN POINT) when copying/pasting
or moving/pasting.
* Press this key while the [SHIFT] key is depressed to
CHECK/CHANGE the parameters saved in [MARK6].
* This can be used as Locate Memory.
38. [CLIPBOARD-OUT/MARK7] Key
* This key is used to CHECK/CHANGE the parameter saved
at the end point (CLIPBOARD OUT POINT) when copying
from or pasting to the clipboard.
* Press this key while the [SHIFT] key is depressed to
CHECK/CHANGE the parameters saved in [MARK7].
* This can be used as Locate Memory.
39. [A RTN/A PLAY/SCENE SEQ.] Key
* Every time this key is pressed the mode switches from
Auto Play -> Auto Return -> Auto Repeat -> OFF, and this
mode is shown on the LCD.
* Press this key while the [SHIFT] key is depressed to turn
ON/OFF the scene sequence.
When scene sequence is switched “on”, the normal
display section “S**” will change to reversed black and
white display.
40. [HOLD/>] Key
* This key is used to hold the parameter (time or BAR/
BEAT/CLK) when the key is pressed. The parameter is
simultaneously displayed and is editable.
* When this key is pressed at editing of the value, the digit
can be moved to the right or below, and if this key is
pressed while pressing on the [SHIFT] key, it can be
moved to the left or above.
41. [STORE] Key
* This key is used to store the edited parameters (time or
BAR/BEAT/CLK) to the editing point (AUTO PUNCH
POINT, etc.), MARK point, LOCATE MEMORY, etc.
42. [EDIT] Key
* This key is used to copy, past and edit the sound.
The following 5 types of sound editing types are
possible.
a. [Copy Clip]
b. [Move Clip]
c. [Copy Paste] or [Move Paste]
d. [Erase]
e. [Track Exchange]
43. [UNDO/REDO] Key
* This key is used to copy, past and edit sound as well as
cancel and undo the auto punch in/out, recording and
other processes.
* Press this key again to return to the state prior to undo
(redo).
44. [VARI PITCH/P.EDIT] Key
* Every time this key is pressed the mode alternates
between VARI PITCH (PLAY/REC at different speed) ON
(Key: Light ON)/OFF (Key: Light OFF).
* Press this key while the [SHIFT] key is depressed to alter
the speed variation (Pitch Edit).
45. [LOCATE/EVT MEM] Key
* This key is used to locate the editing point (AUTO PUNCH
POINT, etc.) and Mark Point.
* The last located parameter is saved as the parameter of
this key, every time. Therefore, it is possible to simply
press this key to go to the last located point( L A S T
LOCATE).
* Press this key while the [SHIFT] key is depressed to edit
the parameter saved in Event Memory (Event number
01-99).