138
2. Select the desired item with the [JOG] dial and press the
[ENTER/YES] key.
The selected item will be set.
Whether the fader manipulation should be reflected on the sound volume or not can be set.
The setup content will be held even if the main power is switched off.
1. Select “Fader Fix” in the menu selection display and press the
[ENTER/YES] key.
The currently set will flash. “
Off
” will flash in the initial
setting.
On
For all modes, manipulation of the
Channel fader/Master fader will
have not affect on the sound volume.
Any accidental shifting of the fader
position by vibration and
misoperation can be prevented.
Off (Initial setting)
Manipulation of the Channel fader/
Master fader will affect the sound
volume.
3. Press the [EXIT/NO] key (or [STOP] key) to exit from the SETUP
mode.
• Initial setting:
“Off”
• Options:
“On” or “Off”
* You can set the value for each Program individually.
* The settings can be saved and loaded as part of the
song data.
* The settings are maintained after you turn off the
power to the VF160.
Flashing
2. Input the desired item with the [JOG] dial and press the [EN-
TER/YES] key.
The selected item will be set.
In the "Setup of the fader recall mode" menu, whether each channel input fader/master fader settings should be
recalled or not at scene recall, can be setup.
1. Select “Fader Recall” in the menu a selection display and press
the [ENTER/YES] key.
The currently set will flash. “
Off
” will flash in the initial
setting.
Off
When scene is recalled, the fader
position immediately prior to
recalling the scene will be directly
employed without recalling the
setup figures of each channel fader
and the master fader.
CH (Channel)
When scene is recalled, setup figures
of each channel faders only will be
recalled and not recall the master
fader setup figure.
MST (Master)
When scene is recalled, the setup
figure of the master fader only is
recalled and the channel fader setup
figures will not be recalled.
CH & MST
When scene is recalled, each channel
faders and the master fader set up
figures will both be recalled.
3. Press the [EXIT/NO] key (or [STOP] key) to exit from the SETUP
mode.
• Initial setting:
“Off”
• Options:
“Off”, “CH”, “MST” or “CH & MST”
* You can set the value for each Program individually.
* The settings can be saved and loaded as part of the
song data.
* The settings are maintained after you turn off the
power to the VF160.
Flashing
<Caution>
The “Fader Fix Mode” can be made to function when set
in other (CH, MST or CH & MST) than “Off” of the next
item on the “Fader Recall Mode”.
<Caution>
When changing the setting from any option other than "Off" to "Off", or from "CH&MST" to "MST" or "CH", "Level Adjust!
Sure?" appears in the display (this is because, after a scene is recalled, the physical fader positions may not match the
levels). Press the [ENTER/YES] key and adjust levels. Note that there may be sudden level jumps depending on the fader
positions. If you do not adjust levels, press the [EXIT/NO] key.
Fader Fix Mode Setting [“Fader Fix”]
Fader Recall Mode Setting [“Fader Recall”]
(Initial setting)
Summary of Contents for VF-160
Page 153: ......
