141
<Important!>
EQ cannot be applied to the channel (Except the master
channel) setup for the compressor.
With the compressor channel setup, if the EQ editing
mode is entered, this condition will be indicated by the
[CH STATUS/CH SEL]
key LED.
The channel in which the LED (green) is blinking is an
indication that EQ editing is possible in this channel and
the channel in which the LED is not lit is an indication
that EQ cannot be applied to this channel.
If a channel that cannot be EQ editing had been selected,
the "
Can't Select!
" message will blink to warn that the
operation is ineffective.
The schematic below is an example of channels 15-16
setup as the compressor channel.
This is indicating that channels 15 and 16
are setup as the compressor channel.
Flashing
2. Select the desired comp. Channel with the [JOG] dial and
press the [ENTER/YES] key.
The selected item will be set.
• Initial setting:
“Off”
• Options:
“Off”, “13-14” or “15-16”
* Common to all programs in the same disc.
* The setup content cannot be saved/loaded as song
data.
* Although the setup content will not be held at switch
off of power, it can be saved as a scene memory.
In the "Setup of the compressor channel" menu, the channel in which the VF160 internal compressor function
should be activated can be setup. The compressor can be made to function in channels 13-14 or 15-16.
Regardless to this setting, the compressor can be applied at all times to the master channel.
1. Select “Comp. Channel” in the menu selection display and press
the [ENTER/YES] key.
The currently set will flash. “
Off
” will flash in the initial
setting.
3. Press the [EXIT/NO] key (or [STOP] key) to exit from the SETUP
mode.
Off
Compressor can be applied only in
the master channel.
13-14
The compressor can be applied to
channels 13/14 and the master
channel.
15-16
The compressor can be applied to
channels 15/16 and the master
channel.
<Note>
The VF160 internal compressor can be made to function
only in the channel setup here and the master channel.
However, editing of EQ in channels other than the mas-
ter channel, is not permissible.
Flashing
Compressor Channel Setting [“Comp. Channel”]
CH (Channel)
Summary of Contents for VF-160
Page 153: ......
