- 782 -
Group Mode
- Choose the group administrative mode for the switch by selecting enable or disable
from the pull-down menu. The factory default is disabled. You could enable this group as active port
and backup port are configured.
Active port
- Configure the active port for a group. 6 port pair for six 1Gbps are configurable for
active port.
Backup port
- Choose the backup port for a group. 6 port pair for six 1Gbps are configurable for
backup port.
MAC Move Update
- Choose the MAC Move Update mode for the switch by selecting enable or
disable from the pull-down menu.
Configurable Data
Fail Back Timer
- Configure the time delay for activating the active port.
Command Buttons
Submit
- Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
Delete
- Delete this group.
11.3.26.2 Configuring Port-Backup Status
This page displays the status of all currently configured port-backup.
Non-Configurable Data
Admin Mode
- The administrative mode of the port-backup function.
Group ID
- The group identify of the port-backup. The range of the group ID is 1~6.
Mode
- The administrative mode of this group.
Active port
- The configured active port for this group.
Backup port
- The configured backup port for this group.
Current Active port
- Current active port for this group.
Failback Time
- The Failback Time value for the group.
MAC Move Update
- The MAC Move Update mode for the group.
Command Buttons
Refresh
- Refresh the data on the screen with the present state of the data in the switch.
