- 291 -
Unknown:
Specifies the unknown bit associated with a particular policy type.
Tagged:
Specifies the tagged bit associated with a particular policy type.
Inventory
Specifies if inventory TLV is present in LLDP frames.
Hardware Rev:
Specifies hardware version.
Firmware Rev:
Specifies Firmware version.
Software Rev:
Specifies Software version.
Serial Num:
Specifies serial number.
Mfg Name:
Specifies manufacturers name.
Model Name:
Specifies model name.
Asset ID:
Specifies asset id.
Location
Specifies if location TLV is present in LLDP frames.
Subtype:
Specifies type of location information.
Info:
Specifies the location information as a string for given type of location id.
Extended POE
Specifies if local device is a PoE device.
Device Type:
Specifies power device type.
Extended POE PSE
Specifies if extended PSE TLV is present in LLDP frame.
Available:
Specifies available power sourcing equipment's power value in tenths of watts on the
port of local device.
Source:
Specifies power source of this port.
Priority:
Specifies PSE port power priority.
Extended POE PD
Specifies if extended PD TLV is present in LLDP frame.
Required:
Specifies required power device power value in tenths of watts on the port of local
device.
Source:
Specifies power source of this port.
Priority:
Specifies PD port power priority.
7.12.1.11 show lldp med remote-device
The user can go to the CLI Privilege Exec to d
display the summary information about remote devices
that transmit current LLDP-MED data to the system. use the
show lldp med remote-device
{<slot/port> | all}
Privilege command.
Syntax
show lldp med remote-device {<slot/port> | all}
