Ford NEW GENERATION STAR TESTER, Introduction Manual

Page: 54 / 122

3-22 NGS-Navigation
LESSON 3
NOTES
CAPTURING DATA
As soon as you push START, the NGS initializes the
communication link and starts recording data. Until you
activate CAPTURE DATA, the NGS cycles through the data it
is monitoring and recording.
Approximately every 2 to 3 minutes, the NGS begins recording
new data over the old.
If a signal is not received from the diagnostic link, the message
MODULE NOT RESPONDING appears on the screen. If this
message appears, make sure the vehicle ignition key is in
RUN or ON position and the connections to NGS are secure.
At any point, the data being monitored and recorded by the
NGS can be captured. The message on the screen instructs
you to press the TRIGGER when you are ready to capture
data. Upon pressing the TRIGGER, data continues to be
captured until the session is ended manually or the time limit
has been reached.
6630 5-11
1 2 3 4 5 6 7 8 9 0
ECT
ECT°
PFE
HO2S2
PRESS TRIGGER TO CAPTURE DATA
0.85VDC
155°F
3.25VDC
0.5VDC TP 0.75VDC