manualshive.com logo in svg

Ford CG3548en, Owner'S Manual

Share
Download
Ford CG3548en Owner'S Manual Download Page 43

Repeat

This feature will play tracks on a
continuous loop.

Touch the 

REPEAT

 button to turn this on

and off. The button stays highlighted when
this feature is on.

Note:

The icon within the button shows if

the feature is applied either to the track or
a folder in the case of a CD disc with MP3
audio. Repeat button presses toggle
between these different modes.

Scan

This feature will play a short introduction
of each track before advancing to the next
track. Turn the feature off once the desired
track is reached.

Touch the 

SCAN

 button to turn this on and

off. The button stays highlighted when this
feature is on.

Note:

The icon within the button shows if

the feature is applied either to the whole CD
disc or a folder in the case of a CD disc with
MP3 audio. Repeat button presses toggle
between these different modes.

MP3 CD playback

The internal CD drive will also play
CD-ROMs with MP3 files.

Supported formats include:

•

MPEG1, Audio layer 3 (ISO/IEC 11172-3)

•

MPEG2, Audio layer 3 (ISO/IEC
13818-3.2)

•

Scan rates of 8, 11.025, 12, 16, 22.05, 24,
32, 44.1, 48 kHz

•

Permissible bit rate is 8kbit/s to 320
kbit/s

You can browse files and folders in a MP3
disc by using the scroll bar tool on the right
side of the screen. Touch the scroll bar
arrows.

The root directory will be shown first,
together with any folders and tracks in this
area. Selecting a track from here will start
playback. If you wish to search a folder,
select the button corresponding to this
folder. The contents of the folder will be
displayed, showing any tracks or further
nested sub folders. Touch the back button
on the left side of the screen to go back a
step.

Note:

Naming folders as album titles may

help when browsing an MP3 disc.

CD changer playback

If a CD changer is connected to the
navigation unit, press the CD/AUX button
until the CD changer screen is displayed.
This will activate the CD changer as the
currently selected audio source.

Filled slots in the CD changer magazine are
displayed on the screen. Touch the button
for the disc number you wish to play.

The controls for a disc playing via the CD
changer are the same as for a disc in the
internal CD drive.

Auxiliary input

If your vehicle is equipped with an AUX
input socket selecting AUX will allow an
external device to be played through the
system.

Press CD/AUX twice to select the AUX
input mode. You may control volume and
other audio settings in the same way as
for other sources.

41

Audio operation - Vehicles With: Touchscreen Display

Summary of Contents for CG3548en















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands