manualshive.com logo in svg

Ford CG3548en, Owner'S Manual

Share
Download
Ford CG3548en Owner'S Manual Download Page 20

The 

BALANCE

 control is used to adjust

the sound distribution between the left and
right speakers.

The 

FADE

 control is used to adjust the

sound distribution from front to rear.

The 

TREBLE

 and 

BASS

 controls adjust

the high and low audio frequencies
respectively. These settings may be
customized for each source.

The 

LOUDNESS

 control boosts the lower

frequency range at low volumes to achieve
a fuller sound.

The 

COMPRESSION

 feature can be

turned on or off. With the feature on,
quieter music is boosted and louder music
lowered to minimise repeated volume
adjustments.

CD OPERATION

Note:

For sound setting information  See

Radio operation

 (page 17).

Press the CD/AUX button.

If a CD is loaded this will start playing,
otherwise a warning will appear advising
that the CD slot is empty.

Note:

Pressing the CD/AUX button

repeatedly will toggle between the AUX
input mode, CD mode and CD changer mode
(if fitted).

Playing a CD

Loading a disc into the CD aperture will
automatically start CD playback and enter
the CD screen. If another source is playing
and a CD is already loaded, pressing the
CD/AUX button will resume CD playback.

Track seek

To advance a track press the 

SEEK up

button.

To go to the beginning of a track press the

SEEK down

 button. Press the button

again to go to the previous track.

Track fast forward/reverse

Press and hold the 

SEEK up

 and 

SEEK

down

 buttons to search forwards or

backwards within the track playing.

Shuffle

This feature will play tracks in a random
order.

Press the 

SHUFFLE

 button to turn this on

and off. The button stays highlighted when
this feature is on.

Note:

The feature is applied either to the

whole CD disc or a folder in the case of a CD
disc with MP3 audio. Repeated button
presses toggle between these different
modes.

Repeat

This feature will play tracks on a
continuous loop.

Press the 

REPEAT

 button to turn this on

and off. The button stays highlighted when
this feature is on.

Note:

The feature is applied either to the

track or a folder in the case of a CD disc with
MP3 audio. Repeat button presses toggle
between these different modes.

Scan

This feature will play a short introduction
of each track before advancing to the next
track. Turn the feature off once the desired
track is reached.

Press the 

SCAN

 button to turn this on and

off. The button stays highlighted when this
feature is on.

18

Audio operation - Vehicles With: CD Navigation System

Summary of Contents for CG3548en















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands