manualshive.com logo in svg

Ford 2013 Fiesta, Owner'S Manual

Get your hands on the comprehensive Owner's Manual for the Ford 2013 Fiesta and unleash the full potential of your vehicle. This essential manual is available for free download at manualshive.com, providing you with the key information and guidelines to maximize your driving experience.

Share
Download
background image

Whenever coolant has been added, the coolant level in the coolant
reservoir should be checked the next few times you drive the vehicle. If
necessary, add enough prediluted engine coolant to bring the coolant
level to the proper level.

Recycled Engine Coolant

Ford Motor Company does not recommend the use of recycled engine
coolant since a Ford-approved recycling process is not yet available.

Always dispose of used automotive fluids in a responsible manner.

Follow your community’s regulations and standards for recycling and
disposing of automotive fluids.

Severe Climates

If you drive in extremely cold climates:

•

It may be necessary to have a Ford authorized dealer increase the
coolant concentration above 50%.

•

A coolant concentration of 60% will provide improved freeze point
protection. Increased engine coolant concentrations above 60% will
decrease the overheat protection characteristics of the engine coolant
and may cause engine damage.

If you drive in extremely hot climates:

•

It may be necessary to have a Ford authorized dealer decrease the
coolant concentration to 40%.

•

A coolant concentration of 40% will provide improved overheat
protection. Decreased engine coolant concentrations below 40% will
decrease the corrosion and freeze protection characteristics of the
engine coolant and may cause engine damage.

Vehicles driven year-round in non-extreme climates should use
prediluted engine coolant for optimum cooling system and engine
protection.

TRANSMISSION FLUID CHECK

Checking Automatic Transmission Fluid

Note:

Transmission fluid should be checked and, if required, added by

an authorized dealer.

The automatic transmission does not have a transmission fluid dipstick.

See your

Scheduled Maintenance Information

for scheduled intervals

for fluid checks and changes. Your transmission does not consume fluid.

Maintenance

205

2013 Fiesta

(fie)

Owners Guide gf, 2nd Printing
USA

(fus)

Summary of Contents for 2013 Fiesta



























































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Fiesta

FormFit HD 23A 07 Installation Instructions preview
HD 23A 07
Brand: FormFit Pages: 4
Axxess AXGMLN-08 Installation Instructions Manual preview
AXGMLN-08
Brand: Axxess Pages: 8
Yakima Whispbar K887W Fitting Instructions Manual preview
Whispbar K887W
Brand: Yakima Pages: 19
Nav TV UCI-11C NTV-KIT331 User Manual preview
UCI-11C NTV-KIT331
Brand: Nav TV Pages: 4
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
Nav TV PCM3CAM Install Manual preview
PCM3CAM
Brand: Nav TV Pages: 4
v.LOGiC V5-CIC-E-PNP Manual preview
V5-CIC-E-PNP
Brand: v.LOGiC Pages: 22
Subaru Legacy 2011 Quick Reference Manual preview
Legacy 2011
Brand: Subaru Pages: 19
CARFACE CF145962E Instruction Manual preview
CF145962E
Brand: CARFACE Pages: 16
RAM 1500 CLASSIC 2020 Owner'S Manual preview
1500 CLASSIC 2020
Brand: RAM Pages: 360
Kolpin 1466 Product Instructions preview
1466
Brand: Kolpin Pages: 6
Edelbrock PRO-FLO XT 3527 User Manual preview
PRO-FLO XT 3527
Brand: Edelbrock Pages: 39
Front Runner LATF002 Quick Start Manual preview
LATF002
Brand: Front Runner Pages: 7
T-Tech FIT417 Service Bulletin preview
FIT417
Brand: T-Tech Pages: 1
SkyRack SR-CB-101 Assembly And Instruction Sheet preview
SR-CB-101
Brand: SkyRack Pages: 2
Alfa Romeo Giulia 952 2017 Owner'S Handbook Manual preview
Giulia 952 2017
Brand: Alfa Romeo Pages: 324
Rhino-Rack RLCP05 Installation Manual preview
RLCP05
Brand: Rhino-Rack Pages: 4

Brands by name

Popular brands

Load more brands