manualshive.com logo in svg

Ford 2013 Fiesta, Owner'S Manual

Get your hands on the comprehensive Owner's Manual for the Ford 2013 Fiesta and unleash the full potential of your vehicle. This essential manual is available for free download at manualshive.com, providing you with the key information and guidelines to maximize your driving experience.

Share
Download
background image

ROADSIDE ASSISTANCE

Vehicles Sold in the U.S. : Getting Roadside Assistance

To fully assist you should you have a vehicle concern, Ford Motor
Company offers a complimentary roadside assistance program. This
program is separate from the New Vehicle Limited Warranty. The service
is available:

•

24-hours a day, seven days a week

•

for the coverage period listed on the Roadside Assistance Card
included in your owner’s manual portfolio.

Roadside assistance will cover:

•

a flat tire change with a good spare (except vehicles that have been
supplied with a tire inflation kit).

•

battery jump start.

•

lock-out assistance (key replacement cost is the customer’s
responsibility).

•

fuel delivery – Independent Service Contractors, if not prohibited by
state, local or municipal law shall deliver up to 2.0 gallons (7.5 liters)
of gasoline or 5.0 gallons (18.9 liters) of diesel fuel to a disabled
vehicle. Fuel delivery service is limited to two no-charge occurrences
within a 12-month period.

•

winch out – available within 100 feet (30.5 meters) of a paved or
county maintained road, no recoveries.

•

towing – Ford and Lincoln eligible vehicles towed to an authorized
dealer within 35 miles (56 kilometers) of the disablement location or
to the nearest authorized dealer. If a member requests to be towed to
an authorized dealer more than 35 miles (56 kilometers) from the
disablement location, the member shall be responsible for any mileage
costs in excess of 35 miles (56 kilometers).

Trailers shall be covered up to $200 if the disabled eligible vehicle
requires service at the nearest authorized dealer. If the trailer is disabled,
but the towing vehicle is operational, the trailer does not qualify for any
roadside services.

Vehicles Sold in the U.S. : Using Roadside Assistance

Complete the roadside assistance identification card and place it in your
wallet for quick reference. This card is found in the owner’s manual
portfolio in the glove compartment.

178

Roadside Emergencies

2013 Fiesta

(fie)

Owners Guide gf, 2nd Printing
USA

(fus)

Summary of Contents for 2013 Fiesta



























































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Fiesta

Saab 99 Important Operatlng, Safety And Maintenance Instructions preview
99
Brand: Saab Pages: 75
PAC SWI-RC Installation Instructions preview
SWI-RC
Brand: PAC Pages: 4
PAC RP4-CH11 Manual preview
RP4-CH11
Brand: PAC Pages: 4
PAC BCI-CH41 User Manual preview
BCI-CH41
Brand: PAC Pages: 8
PAC C2R-CHY4 Installation Instructions preview
C2R-CHY4
Brand: PAC Pages: 5
Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
Toro 137-1019 Installation Instructions Manual preview
137-1019
Brand: Toro Pages: 24
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
Thetford SANICON TURBO 300 Operating Instructions Manual preview
SANICON TURBO 300
Brand: Thetford Pages: 25
Skoda KAROQ 2017 Owner'S Manual preview
KAROQ 2017
Brand: Skoda Pages: 324
MAcarbon MAA.R8.06 Install Instructions preview
MAA.R8.06
Brand: MAcarbon Pages: 3
Quadratec QuadraTop 11051.0415 Installation Manual preview
QuadraTop 11051.0415
Brand: Quadratec Pages: 8
Packard 1948 eight Operating Instructions Manual preview
1948 eight
Brand: Packard Pages: 25

Brands by name

Popular brands

Load more brands