manualshive.com logo in svg

Ford 2013 Fiesta, Owner'S Manual

Get your hands on the comprehensive Owner's Manual for the Ford 2013 Fiesta and unleash the full potential of your vehicle. This essential manual is available for free download at manualshive.com, providing you with the key information and guidelines to maximize your driving experience.

Share
Download
background image

example, if an occupant slouches, lies down, turns sideways, sits forward,
leans forward or sideways, or puts one or both feet up, the chance of
injury during a crash is greatly increased.

Children and Airbags

WARNING:

Airbags can kill or injure a child in a child seat.

NEVER place a rear-facing child seat in front of an active airbag.

If you must use a forward-facing child seat in the front seat, move the
seat all the way back.

Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a crash.

KNEE AIRBAG

The knee airbag is located under the instrument panel. The system
works along with the driver’s front airbag to help reduce injury to the
legs. When the driver’s airbag activates in a collision, the knee airbag
deploys from under the instrument panel. As with front and side airbags,
it is important to be properly seated and restrained to reduce the risk of
death or serious injury.

To know if the knee airbag is operating properly, see

Crash

Sensors and Airbag Indicator

in this chapter.

FRONT PASSENGER SENSING SYSTEM

WARNING:

Even with Advanced Restraints Systems, children 12

and under should be properly restrained in a rear seating

position.

46

Supplementary Restraints System

2013 Fiesta

(fie)

Owners Guide gf, 2nd Printing
USA

(fus)

Summary of Contents for 2013 Fiesta



























































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Fiesta

Daihatsu F300 Service Manual preview
F300
Brand: Daihatsu Pages: 1718
TBC DPI1K User Manual preview
DPI1K
Brand: TBC Pages: 12
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
RBO RBO4038 Product Manual preview
RBO4038
Brand: RBO Pages: 15
Oldsmobile 2003 Silhouette Owner'S Manual preview
2003 Silhouette
Brand: Oldsmobile Pages: 466
Black+Decker BXAE00011 Operating Instructions Manual preview
BXAE00011
Brand: Black+Decker Pages: 21
Beeper RW050RF User& Installer'S Manual preview
RW050RF
Brand: Beeper Pages: 20
GReddy 12519101 Instruction Manual preview
12519101
Brand: GReddy Pages: 12
BENDIX A-18 TRAILER ABS Manual preview
A-18 TRAILER ABS
Brand: BENDIX Pages: 40
Toyota RAV4 HV 2016 Quick Reference Manual preview
RAV4 HV 2016
Brand: Toyota Pages: 56
ULTIMATE SPEED 290923 Operation And Safety Notes preview
290923
Brand: ULTIMATE SPEED Pages: 56
Yenkee YAC 450 User Manual preview
YAC 450
Brand: Yenkee Pages: 22
STO N SHO SNS 297 Installation Procedures Manual preview
SNS 297
Brand: STO N SHO Pages: 7
Porsche 1972 911 Workshop Manual preview
1972 911
Brand: Porsche Pages: 1005
PAC RPK4-CH4102 Manual preview
RPK4-CH4102
Brand: PAC Pages: 18
Crux BEELINE Series Manual preview
BEELINE Series
Brand: Crux Pages: 8
Crux ACPBM-77X Manual preview
ACPBM-77X
Brand: Crux Pages: 12

Brands by name

Popular brands

Load more brands